parameter-map type webauth activate-802.1x and no parameter-map type webauth activate-802.1x

[getaway51]

#parameter-map type webauth activate-802.1

This operation will permanently convert all relevant authentication commands to their CPL control-policy equivalents. As this conversion is irreversible and will disable the conversion CLI 'authentication display [legacy|new-style]', you are strongly advised to back up your current configuration before proceeding.
Do you wish to continue? [yes]:

yes

#no parameter-map type webauth activate-802.1x

Will this command change any of my existing switch config or posses any risk to existing config? 

[Jason Kunst · Accepted solution]

i'd recommend posting this to the switching community as well