PIX and pool defined on ACS server

[serguei.bezverkhi]

Hello,

I would greatly appreciate if somebody could confirm two things:

1. Whether PIX supports assigning IP addreesses to VPN clients from IP POOLs defined on Cisco Secure ACS 3.1 server?

2. If I define several IP LOCAL POOLs on the PIX and assign them to different ACS groups, does it (PIX) support "IP Assignment - Assigned from AAA Client pool" option on Cisco Secure ACS 3.1 server for VPN Clients?

Thank you in advance

[hadbou]

Unfortunately, this is currently not possible with the PIX software, the mode-config address must be defined locally, as shown in the below given URL.

http://www.cisco.com/warp/public/110/B.html