09-05-2011 04:52 AM - edited 03-10-2019 06:22 PM
Hi guys my problem is about Radius.It can not assign ip to remote host.This host request ppp and it terminated by on our Cisco router(LAC-LNS).And Cisco router uses AAA for authentication and ip assignment.Authentication part is okey.The host can connect radius and passes username password phase.But when the ppp protocol pass next ipcp level, host request;confreq is above,
Primary DNS server IP address: 0.0.0.0
Secondary DNS server IP address: 0.0.0.0
Primary WINS server IP address: 0.0.0.0
Secondary WINS server IP address: 0.0.0.0
IP address: 0.0.0.0
But the Router returns reject;confrej
Primary DNS server IP address: 0.0.0.0
Secondary DNS server IP address: 0.0.0.0
Primary WINS server IP address: 0.0.0.0
Secondary WINS server IP address: 0.0.0.0
IP address: 0.0.0.0
After this negotiation ppp ipcp part is terminated and the host never get ip address.
My question, Although the ppp authentication seems okey, why the remote host does not get ip address.Shoul I focus radius config. or Router config. ?
Thanks.
09-05-2011 05:36 AM
Hi,
Can you paste the configuration of the virtual-template?
Enable also deb ppp nego and deb radius and collect the logs.
Cheers
Marco
09-05-2011 06:52 AM
Hi Marco,
interface Virtual-Template1
ip unnumbered GigabitEthernet0/0.12
no ip mroute-cache
no peer default ip address
ppp authentication pap
ppp ipcp predictive
I will paste here also debug files.
Best regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide