01-17-2020 02:04 AM
After the problem that we were dealing with Cisco support on the server bug he asked to change the package parameters:" We changed the Setting on Server ( Package C-State limit change to C0/C1)" .
Then following this modification in the server we had another problem when we start the VM ISE and Cisco support he asked to open another ticket on Cisco ISE appliance.
the problem exactly is:
after that we reloaded to applied new setting ,so when start up the ESXI host after that we checked ALL VM’s are bring up except ( Cisco ISE ) we faced issue failed ( power on ) many times during 20 min after that we tried once it has succeeded to power on
01-17-2020 07:29 AM
What are the error details? It is possible that the VM was still updating as a result of the change. Or something else was going on within ESXi. Would need to see the error details to know more.
01-17-2020 11:11 AM
01-18-2020 06:03 PM - edited 01-18-2020 06:03 PM
I agree with Colby and Damien. You need to check and verify the errors in VMware ESXi. Each VM usually has logs (vmware.log?) with some info.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide