Problem with RADIUS Authentication on hhtps

[aims]

I have managed to authenticate through ssh on my C3650 stack but when i am trying to authenticate from https i get a message that says wrong credentials. It seems that the issue is what the radius servers returns but i wasn't able to find anything on the web. Any suggestions please?

[Flavio Miranda]

Do you have "ip http authentication aaa" configured on the switch?

What might happeing is that you dont have the above command and the switch is using local authentication for http/https. As you try with TACACS user, it refuses.

[balaji.bandi]

what kind of authenticaiton you have local or radius :

check below document :

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/https/configuration/xe-3se/3650/https-xe-3se-3650-book/nm-http-web.html

[aims]

As i mentioned on the first post, i can login using radius on ssh. On http when i do my tries i add this line on configuration file:

ip http authentication aaa login-authentication default

When i add this line on radius server i see that my users are authenticated successfully but on the https login page i get the below screen. 

and of course if i log in with my local account i get the same message and authentecation failed on radius.

On radius server i have the following settings:

and