cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
603
Views
0
Helpful
1
Replies

Put pxGrid on same VLAN as PAN or MNT to minimize network traffic?

dyuen001
Level 1
Level 1

We have dedicated VLAN for PAN, MNT, and PSNs.  Which VLAN should I put pxGrid to minimize any traffic congestion such as traffic between pxGrid clients and MNT? 

1 Accepted Solution

Accepted Solutions

kthiruve
Cisco Employee
Cisco Employee

HI Danny,

Between ISE nodes we need less than 300ms delay that is the main consideration.

Also you need ports to be open if you have firewall between nodes.

Here is the port reference chart for ISE 2.3.

https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/install_guide/b_ise_InstallationGuide23/b_ise_InstallationGuide23…

Thanks

Krishnan

View solution in original post

1 Reply 1

kthiruve
Cisco Employee
Cisco Employee

HI Danny,

Between ISE nodes we need less than 300ms delay that is the main consideration.

Also you need ports to be open if you have firewall between nodes.

Here is the port reference chart for ISE 2.3.

https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/install_guide/b_ise_InstallationGuide23/b_ise_InstallationGuide23…

Thanks

Krishnan