RADIUS Live log shows nothing

[ciscoworlds]

Hi. 

My ISE 2.2.0.470 doesn't show anything on the RADIUS Live Log page despite that it works fine! I have 2 interfaces on ISE, one for administration and one for guest portal and logins. Clients (including guests and admins) can successfully log in to the network and being authenticated, but nothing shows on that page. I restarted the ISE several times but nothing happen. 

[Marvin Rhoads · Accepted solution]

What patch level are you running on your deployment?

If you aren't on Patch 5 then you should move to that - 2.2 has quite a few bugs on the earlier releases.

[ciscoworlds]

Hi;

I installed patch 4 and some of previous logs are back. I didn't find patch 5, but I'm using on my lab for learning purpose and it seems this was enough for me. Thanks all who gave answer to my question :)

UPDATE: after half an hour, Logs stopped being displayed again!! Again ISE works fine but nothing are shown on the RADIUS Live Log page. What is wrong with ISE? I used this very image before without any problem. :(

[Mohammed al Baqari]

I had the same problem with 2.2 and was throwing context certificate error.
Later found it a bug along with many other bugs. Moved to 2.3 which more
stable with patch 1

[ajc]

Check if you have the "update frequency tab" on the left side of the live logs not equal to NEVER. If changing it still does not work then you are facing the same bug we saw in our large deployment for 2.2 buggy version. Open a TAC case