cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

777
Views
5
Helpful
1
Replies
alex goshtaei
Beginner

RBAC in ISE

Hi All, 

I'm trying to setup RBAC in ISE which it gets external group from AD. however when I create local group in ISE and select "type = External", I don't see any AD groups in the list, but I've already add AD groups to ISE. 

any suggestion would be appreciated. 

thanks 

Alex

1 ACCEPTED SOLUTION

Accepted Solutions
nspasov
Cisco Employee

Hello Alex-

Do you have AD enabled as an identity source under "Administration > Admin Access > Authentication"

Also, from the screenshot that you have posted, when you try to add an external group, do you click on the "Add" button or do you select the "Select and Item" drop-down menu under the "external groups"

Thank you for rating helpful posts!

View solution in original post

1 REPLY 1
nspasov
Cisco Employee

Hello Alex-

Do you have AD enabled as an identity source under "Administration > Admin Access > Authentication"

Also, from the screenshot that you have posted, when you try to add an external group, do you click on the "Add" button or do you select the "Select and Item" drop-down menu under the "external groups"