Guest redirect keep going in loop

[Craig Hyps]

NOTE: This is a reply to original post here: Guest redirect keep going in loop

Question was posted as discussion, but now converted to question.

RESPONSE: 

Could be hitting defect on UseCase EQUALS GuestFlow.  In other thread, it souynded like you were testing with ISE 2.3 P2.  This was fixed in P3 (already at P4):

CSCvh06189 

Attributes for the guest flow do not match in the Authorization Policy.

[dgaikwad]

Yes, I am using the following

Version 2.3.0.298

Installed Patches 3

Do I need to move it to patch 4?

As the fixed versions shown are in 2, 3 and 4...

[Jason Kunst]

doesn't seem likely then. did you troublehshoot with tac? recommend looking at the ISE Guest Access Deployment Guide

[Craig Hyps · Accepted solution]

If all working except matching on Guest Flow, then try recreating condition manually. If fails to match on condition but Live Log shows use case = guest flow, then need to work with TAC to verify if bug needs to be re-opened.