cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
556
Views
0
Helpful
2
Replies

Re-IP of ACS5.5 Secondary Instance

ackoch001
Level 1
Level 1

Hi,

So I have 2 ACS 5.5 appliances that have been working in Primary/Secondary replication mode for several years.  I just moved the secondary off-site and changed it's IP / reflected DNS.  The secondary came up as a primary.  I removed any config in "Distributed System Management" for the secondary node (on both hosts). 

Then since it appeared that everything was cleared, I went to "Deployment Operations" and attempted to register it to my primary, and now it just says "You cannot register server to itself.  Please provide another hostname/ip address."  When I try it by FQDN it just gives me a java error.

Any idea how I can get replication working again between these two nodes?

.:Edit:.

A reload fixed it.  The "Instance Status" info at the top was incorrect until after I reloaded it.

2 Replies 2

ackoch001
Level 1
Level 1

Also, both devices can ping one another.  Just seems that the replication configuration is intolerant of an IP change and I'm not sure where to go from here. :(

Hi Ackoch0013,

Please do the full replication or deregister the secondary node and add it once again to deployment .

Could you please let us know ,if any other details required .

Thanks

VenkataKrishna

Please rate helpful posts and mark correct answers.