cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2423
Views
0
Helpful
1
Replies

Reauthentication timer max value

michelegarribba
Level 1
Level 1

Hi all,

What is the maximum value of the re-authentication timer in the authorization policy for RADIUS i can set?

I haven't find anything in documentation.

Thanks!

smaikol

1 Accepted Solution

Accepted Solutions

I can not find a max time value unless it is just limited by numerical length. This is a discussion on best practices I found.

https://supportforums.cisco.com/discussion/11974106/ise-reauthentication-timer

In trying to enter a long timer, ISE limits it to 1-65535 seconds

So, at max value a little over 18 hours.

Now, if you don't set reauth, it should basically be indefinite.

View solution in original post

1 Reply 1

I can not find a max time value unless it is just limited by numerical length. This is a discussion on best practices I found.

https://supportforums.cisco.com/discussion/11974106/ise-reauthentication-timer

In trying to enter a long timer, ISE limits it to 1-65535 seconds

So, at max value a little over 18 hours.

Now, if you don't set reauth, it should basically be indefinite.