Report export to third party syslog server

[yong khang NG]

Hi all,

Is there a way to send the Cisco ACS secure server report to third party syslog server?

Example: for audit purpose, i need the data extract from Monitoring & Reports > Reports >  Catalog >  AAA Protocol

I trying by create new remote log targets, the IP is pointing to third party syslog server.

and at the logging categories > global, i apply the new create log collector to all logging categoires.

Am i doing it right?

please comment, thanks

Noel

[Jatin Katyal]

Hi Yong,

Yes that's possible. You can use the web interface to configure logging category messages so that they are sent to remote syslog server targets

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html#wp1052741

ACS provides these preconfigured global ACS logging categories, to which you can assign log targets.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html#wp1052549

Configuring Per-Instance Remote Syslog Targets

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/admin_config.html#wp1063768

Jatin Katyal
- Do rate helpful posts -