02-27-2013 12:20 PM - edited 03-10-2019 08:08 PM
Hi,
I am trying to restore an ACS backup on ACS v5.4 and am getting the following error:
ntec-nclab-acs0/blancas# restore ntec-nclab-acs0-WLAN2-130226-0400.tar.gpg repository BackupRepository application acs
Restore may require a restart of application services. Continue? (yes/no) [yes] ?
Initiating restore. Please wait...
Backup file does not match installed application
% Application restore failed
ntec-nclab-acs0/blancas# sh application
<name> <Description>
acs Cisco Secure Access Control System 5.4
Here is the content of the repository:
ntec-nclab-acs0/blancas# show repository BackupRepository
ntec-nclab-acs0-WLAN2-130222-0400.tar.gpg
ntec-nclab-acs0-WLAN2-130223-0400.tar.gpg
ntec-nclab-acs0-WLAN2-130224-0400.tar.gpg
ntec-nclab-acs0-WLAN2-130225-0400.tar.gpg
ntec-nclab-acs0-WLAN2-130226-0400.tar.gpg
ntec-nclab-acs0-WLAN2-130227-0400.tar.gpg
Any help would be appreciated!
Ben
02-27-2013 03:47 PM
Are you trying to restore backup of ACS 5.1 to ACS 5.4?
If that is the case then it's not supported. You can only restore ACS 5.2 and 5.3 backup to ACS 5.4.
Regards,
Jatin Katyal
- Do rate helpful posts -
02-28-2013 10:07 AM
Thanks for the reply Jatin but we are attempting restores from the same version of code. Just from a previous backup taken a couple of days ago using the Schedule Backups function on 5.4.
Ben
03-05-2013 09:55 AM
12-23-2015 07:40 AM
Thanks Ben! This worked for me
06-06-2016 09:10 AM
Great tip, worked for me too.
06-08-2016 09:08 AM
Thank you Ben that worked for me as well
06-27-2018 05:40 AM
Thanks, it worked for me also :)
07-02-2019 05:48 AM
In my case, I used "acs restore" and had the problem. The solution was to use only "restore". So also try the other option if you have the problem.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide