03-15-2024 09:14 AM
I'm looking for a method how to import and export SXP device into new ISE server. I did a Backup-Restore method and it didn't restore the SXP devices. Please advise if there any way to achieve that ?
Solved! Go to Solution.
03-17-2024 06:07 PM
If the configured SXP Devices exist in the ISE instance from which you're taking the backup and are not created in the ISE instance to which you are restoring the configuration from that backup, you might want to open a TAC case to investigate. That seems like a very important configuration missing from the restore.
The only method to export/import the SXP Devices would be using the APIs. You would need to use GET calls to retrieve the settings for each individual connection on the source instance, then use either individual POST calls or a bulk PUT call on the target instance.
https://developer.cisco.com/docs/identity-services-engine/latest/#!sxpconnections
03-17-2024 06:07 PM
If the configured SXP Devices exist in the ISE instance from which you're taking the backup and are not created in the ISE instance to which you are restoring the configuration from that backup, you might want to open a TAC case to investigate. That seems like a very important configuration missing from the restore.
The only method to export/import the SXP Devices would be using the APIs. You would need to use GET calls to retrieve the settings for each individual connection on the source instance, then use either individual POST calls or a bulk PUT call on the target instance.
https://developer.cisco.com/docs/identity-services-engine/latest/#!sxpconnections
03-19-2024 05:30 PM
Thank you!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide