12-10-2015 12:58 AM - edited 03-10-2019 11:18 PM
I have CISCO2921 15.4(3)M4:
aaa new-model
aaa authentication login default local
aaa authorization exec default local
username rancid privilege 3 secret 5 $dfgdfgsdfhsdhdfghdfghdfg
privilege exec level 3 show running-config view full
privilege exec level 3 show running-config view
privilege exec level 3 show running-config
privilege exec level 3 show
But when I login and try sh run it is empty. Why?
Solved! Go to Solution.
12-15-2015 04:38 PM
Try this:
- Add the following command to your config:
file privilege 3
- Use the following command instead of show run
show run view full
Thank you for rating helpful posts!
12-10-2015 02:21 AM
when you log in are you sure your priv 3 , check with below , what way is your vty configured
sw]#sh privilege
Current privilege level is 15
12-10-2015 02:41 AM
Yes of course.
#sh priv
Current privilege level is 3
Also I have:
line vty 0 4
access-class 23 in
exec-timeout 60 0
logging synchronous
transport input ssh
12-10-2015 03:29 AM
hmm you could try put login local under the vty so it reverts directly to your username/password or use login authentication default either for the aaa see if that helps
your config looks ok
http://www.cisco.com/c/en/us/support/docs/security-vpn/remote-authentication-dial-user-service-radius/13860-PRIV.html
12-10-2015 11:38 PM
There is no "login local" on Cisco routers. "login authentication default" not help.
12-15-2015 04:38 PM
Try this:
- Add the following command to your config:
file privilege 3
- Use the following command instead of show run
show run view full
Thank you for rating helpful posts!
12-15-2015 07:58 PM
It really works!
12-16-2015 08:06 AM
Great! Glad I was able to help :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide