07-09-2020 04:36 PM
Hello Community Member..,
I recently installed a trial version of ISE ver 2.7 in preparation of Changing my Old Tacacs box.
the ISE Application Sever is fully operation how ever am having challenge in setting up the ''Device Admin Policy Set '' in addition what config do i need on the Cisco Router & Switches for a full blown ISE Tacacs+ solution
Thanks
Solved! Go to Solution.
07-09-2020 04:48 PM
See the ISE Device Administration Prescriptive Deployment Guide for information and example configurations.
07-09-2020 04:48 PM
See the ISE Device Administration Prescriptive Deployment Guide for information and example configurations.
07-10-2020 01:20 AM
From the Device Type attribute . Now from the dropdown List i Could not see the Network Device Group i created initially.
07-10-2020 04:41 PM
If it just created, just navigate out of the condition studio and then get back in again. If still not working, try refreshing the web browser or use another web browser or admin workstation.
07-12-2020 10:20 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide