I would like to give ACS a try, but my infrastructure is now build on WS 2012 Hyper-V. As I don't have any VMWare licenses and am not planning to get any either, I would like to know. Can ACS be installed in a 2012 Hyper-V VM?
If not, anyone an idea if this is ever going to be implemented?
I tried installing 5.4 under Hyper-V 6.3.9600 (Windows Server 2012 R2 Standard). The installer did start, but quit during the hardware check. Would assume it needs to be on custom Cisco hardware or VMWare.
Seeing as ACS goes end of support next year, I doubt Cisco will put any effort in to changing this.
QuestionHello , somebody know if it´s possible to remove the device registration status from the MyDevices portal for the spanish page?By default the status is dispalyed (registered/Pending), this condition was fixed in the english page after load a...
Dears, Please note that I have ASA 5515 running version 9.4.(4)20 and managed through FDM. In addition, I have FMC version 126.96.36.199 for the IPS. I need to upgrade the only the ASA to the latest supported version that work with the FMC version 6.0...
To participate in this event, please use the button to ask your questions
This topic is a chance to clarify your questions about Cisco Threat Response, from its components and new features to ...
Community Live Slides- How to optimize your Cisco Security investments with Threat Response
(Live event - formerly known as Webcast- Tuesday February 18, 2020 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event had place on Tuesday 18th, Februa...
Two main issues I am facing as part of ISE guest access POC lab.On any device on first attempt connections works smooth. However, if I disconnect and reconnect the SSID, its repeatedly giving "Couldn't get an IP address" or "No internet connection" on con...