cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

3223
Views
0
Helpful
1
Replies
Highlighted
VIP Advisor

SXP Import/Export Documentation

I'm not certain the exact IOS version these two commands were initially released in, but could we get them added to the configuration guides where they should have first appeared (maybe? 3.17.3/16.3.2/16.4).  As of right now they are only mentioned within, BRKSEC-2203, these forums, and email inboxes.

cts sxp limit export peer-sequence-nodes 2

cts sxp limit import peer-sequence-nodes 2

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Re: SXP Import/Export Documentation

Hi,

was just going through community questions and saw this had no replies.

Sorry for the delay.

Agreed, I can't find those commands in the documentation either.

The feature was implemented via DDTS CSCuz01059 (Implement SXP path length override option to limit the SXP database size).
These are the integrated releases as per that DDTS:

Everest-16.4.1 Denali-16.3.2 16.4.1 16.4(0.123) 16.3.2 15.6(02)SP01 15.6(01.08)SP01 15.6(01)S4.2 15.6(01)S2.12 15.5(03)S5.16 15.5(03)S06a 15.5(01.00.91)SY01 15.5(01)SY01 15.5(01)IA001.0328 15.4(01.02.62)SY01 15.4(01)SY02 15.4(01)OF01.15 15.4(01)IC001.113 15.2(06.03.00i)E 15.2(06.00.66i)E 15.2(05.03.28i)E01 15.2(05)E02 15.2(05)E01 15.2(04)E03 15.2(03)E05 15.2(02)E06 15.2(01)SY4.45 15.2(01)SY05

I am forwarding a request to the DDTS owners to get the commands added to the documentation.

 

View solution in original post

1 REPLY 1
Highlighted
Cisco Employee

Re: SXP Import/Export Documentation

Hi,

was just going through community questions and saw this had no replies.

Sorry for the delay.

Agreed, I can't find those commands in the documentation either.

The feature was implemented via DDTS CSCuz01059 (Implement SXP path length override option to limit the SXP database size).
These are the integrated releases as per that DDTS:

Everest-16.4.1 Denali-16.3.2 16.4.1 16.4(0.123) 16.3.2 15.6(02)SP01 15.6(01.08)SP01 15.6(01)S4.2 15.6(01)S2.12 15.5(03)S5.16 15.5(03)S06a 15.5(01.00.91)SY01 15.5(01)SY01 15.5(01)IA001.0328 15.4(01.02.62)SY01 15.4(01)SY02 15.4(01)OF01.15 15.4(01)IC001.113 15.2(06.03.00i)E 15.2(06.00.66i)E 15.2(05.03.28i)E01 15.2(05)E02 15.2(05)E01 15.2(04)E03 15.2(03)E05 15.2(02)E06 15.2(01)SY4.45 15.2(01)SY05

I am forwarding a request to the DDTS owners to get the commands added to the documentation.

 

View solution in original post