tacacs configuration for failover in cisco routers and switches

[SELOMECIS]

Need help to configure two cisco tacacs server in routers and switches.

[dhananjoy chowdhury]

Just add the commands as below

R1(config)#tacacs-server host 1.1.1.1 key cisco

R1(config)#tacacs-server host 1.1.1.2 key cisco

[Jatin Katyal]

Hi,

Further to dhananjoy post, you may check this link for configurung all tacacs command on Cisco IOS devices:

http://www.netcraftsmen.net/resources/archived-articles/430.html

HTH

JK

Plz rate helpful posts-

[SELOMECIS]

OK thx

[SELOMECIS]

ok thx,IS THERE ANYWAY I CAN CONFIGURE THE USER NAME PASSWORD FOR THE USER WHEN THE FISRT LOGGING THE CAN CHANGE THE PASSWORD THEMSELVES.