Trustsec SGT Propagation on Nexus 5K

[alex.dersch]

Hi, 

I have issues with configuring SGT propagation on a port-channel which is configured on a FEX attached to 2 Nexus 5K (Code 7.1.4.N1.1)

The configuration of the Interfaces is identical on both Nexus Switches

interface Ethernet101/1/8

  description CONNECTION TO FW01 GI1/3

  switchport access vlan 137

  cts manual

  policy static sgt 2 trusted

  speed 1000

  channel-group 24 mode active

  no shutdown

interface Ethernet102/1/8

  description CONNECTION TO FW01 GI1/4

  switchport access vlan 137

  cts manual

  policy static sgt 2 trusted

  speed 1000

  channel-group 24 mode active

  no shutdown

On the Port-channel I am not able to configure the acts manual statement, any idea why?

thanks in advanced

Alex

[Craig Smith]

Hi, 

Trustsec configuration is placed on to the physical interface and isn't supported on logical interfaces.

What you have should be sufficient, as long as other parameters, such as system mtu are correct.