two factor authentication for fwsm using RSA Tokenserver

[saddam riyaz]

I am currently trying to configure FWSM to have two factor authentication using RSA. I have configured the ACS and RSA server and everything is ok for routers and switches. What do I need to configure on the firewall side. I have pointed the authentication to the ACS server and a normal user with local database is able to login but when I login with a user having database with RSA , it doesnt work.

Sent from Cisco Technical Support iPhone App

[Jatin Katyal]

Hope you can asnwer the below listed questions:

1.] ACS version

2.] Do you see any error on the ACS side while authenticating from RSA database.

3.] Please post the show run from the FWSM.

On the FWSM, you just need to define ACS as an authentication server.

Jatin Katyal
- Do rate helpful posts -

[saddam riyaz]

1.] ACS version 4.2
2.] Do you see any error on the ACS side while authenticating from RSA database.invalid secondary authentication credentials
3.] Please post the show run from the FWSM.
On the FWSM, you just need to define ACS as an authentication server.acs server is defined , cant give out configs


Sent from Cisco Technical Support iPhone App

[Jatin Katyal]

NP.

Where did you see that error on the ACS? Did you check inside the reports and activities > failed attempts > "........."

Also, any logs/error on the RSA manager that we can look at?

Jatin Katyal
- Do rate helpful posts -