cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
391
Views
1
Helpful
7
Replies

Unable to add more than 10 SNMP Host on cisco ISE

jeet-singh
Level 1
Level 1

Hi, I am using Cisco ISE 3515 and 3615 in our environment and want to add additional SNMP hosts in the existing SNMP configuration but when I am trying to add those hosts, it is giving an error "Too many traps have been created, Maximum is 10"

I need the solution on the same. 

7 Replies 7

marce1000
VIP
VIP

 

           - Which ISE version are  you on ?

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

ISE 3.1

Greg Gibbs
Cisco Employee
Cisco Employee

Although it is not documented, I confirmed via another TAC case that this is a hard limit. I'm not sure why you would want/need to send SNMP traps to more than 10 disparate SNMP servers at the same time (this sounds very inefficient), but if you need to do so you would need some external system to replicate the traps and send them to the additional servers.

Can you elaborate the external system please and how we can use in our case. 

i had posted it earlier

ccieexpert_0-1724691638367.png

 

ccieexpert_1-1724691638367.png

 

ccieexpert
Spotlight
 

there are free UDP replicators:

https://github.com/thomseddon/udp-replicator

also there are appliances that you can buy.. it is a option with Cisco stealthwatch (cisco secure analytics)...

Like others have said 10 seems already excessive (:

 

**Please rate as helpful if this was useful**

ccieexpert
Spotlight
Spotlight

there are free UDP replicators:

https://github.com/thomseddon/udp-replicator

also there are appliances that you can buy.. it is a option with Cisco stealthwatch (cisco secure analytics)...

Like others have said 10 seems already excessive (:

 

**Please rate as helpful if this was useful**