Updated Trustsec capability matrix

[tkjaerol]

Hey all,

I'm just curious if there is an updated version of this: https://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise-networks/trustsec/software-platform-capability-matrix.pdf

As far as I can tell it's the latest version, but it says 2018 so I thought I'd check.

Cheers,

Tom

[Damien Miller]

6.5 is the most current that's publicly available at least. It's certainly due for some updates, notably it's missing Cat9k wireless APs/WLCs, FPR 1k, Meraki MS390, and ISR 1k's. Since you're internal, it might be best to contact the IBN group directly with the recommendation.

[thomas]

I suspect all future TrustSec and group-based policy capability updates will be happening as part of Software-Defined Access (SDA) compatibility testing @ http://cs.co/sda-compatibility

[Kevin Regan · Accepted solution]

That doc was actually published last November but clearly we did not update the date in the footer, we will give a correct timestamp for any updates