cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1342
Views
0
Helpful
2
Replies

Using secondary PAN as PSN

dgaikwad
Contributor
Contributor

Hi Team,

Scenario:
Load balance radius traffic between 2 PSNs.
Setup:
It is a 2 node setup with primary and secondary PANs. These are located at two different locations, that one at DC and other at DR. Both have PSN services running on them.
Issue:
Now the question is that, would the PSN services be active all the time in this configuration or will they come online only when primary PAN fails and secondary PAN is made as the primary?

2 Replies 2

Karsten Iwen
VIP Mentor VIP Mentor
VIP Mentor

The PSN services are active the moment they are activated in your deployment. You directly can start using both in your NAD-config. 

Marcelo Morais
VIP Advisor VIP Advisor
VIP Advisor

Hi @dgaikwad ,

 beyond what @Karsten Iwen said ...

 Remember that each ISE Deployment must have: at least one PAN, at least one MnT (Primary and Secondary: PAN and MnT work as Active and Standby state) and one or more PSNs (all Active state).

 Note: PSN will work even if PAN (Primary and/or Secondary) is down.

 

Hope this helps !!!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers