05-12-2017 02:15 AM
Hi Team,
If we install the admin/monitoring nodes based on a smaller OVA template
(like the 3495 PAN/MNT OVA template with 32 GB RAM, 8 Core)
can we increase the memory/CPU at a later time (that requires a reboot) without reimaging the node and migrate to 3595 ?
Or increasing memory/CPU (at a later phase) is only supported if the VM was installed based on ISO?
Thank you!
Best regards, Gyorgy
Solved! Go to Solution.
05-12-2017 10:34 AM
Hi,
You should be able to adjust memory and CPU resources later on. Just be sure to reset the reservations as required.
Regards,
-Tim
05-12-2017 10:34 AM
Hi,
You should be able to adjust memory and CPU resources later on. Just be sure to reset the reservations as required.
Regards,
-Tim
05-12-2017 10:46 AM
Adding to Tim's, please also tweak the personas of the modified VMs, as some ISE resource allocations are only re-adjusted during install/setup or persona changes.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide