VPN client without authentication

[khaledmansour]

Is it possible for Cisco vpn client on Windows to establish connection with PIX 7.2 without further authentication other than the Group Authentication. What I mean is there's no need for username/password. If yes appreciate if you can help with a sample config on PIX based on 7.2 s/w. ...txs RGC

[Farrukh Haroon]

You can use this command to disable X-Auth:

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/i3.html#wp1799159

You can use the following document as a refence, just remove the 'xauth' part from it, that is add the above command in the Remote Access tunnel group (default is Xauth Enabled):

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008060f25c.shtml

Regards

Farrukh

[khaledmansour]

Oh yes, that worked! Farrukh, thanks a lot for your help. greatly appreciate it.

brgds,

RGC

[Farrukh Haroon]

Glad I could help :)

Please rate useful posts.

Regards

Farrukh