Network Access Control

Are the commands different from router to router?This is what I currently have:aaa new-modelaaa authentication login default group tacacs+ localaaa authorization exec default if-authenticated aaa authorization commands 15 default group tacacs+ if-aut...

We *hate* Microsoft's execrable products, but have been required to use a SecureACS server. D'oh! Has anyone gotten ACS to run under Wine? Doesn't seem like it should be too hard, but we don't yet have the bits so we can't test. I guess the other que...

Hi,I'm trying to authenticate the CLI Access by using enable passwords (or secret, as you prefer). I'm not trying to do that for fun, but only because I had this during my CCIE exam...By default, on the router, I had only one enable secret. The quest...

We enabled the MAB feature on our ACS 4.1 for Windows. We were already doing wired 802.1x authentication as well as wireless authentication. The configuration works but the authentications are being mapped to the wrong Network Access Profile. We h...

folksi have a ACS 1113 appliance which i'm trying to hyperterminal to but with no joyi'm using1152008N1No flow controlbut i can't get anything from the consolei have tried the same on my backup box but still the samedoes anyone know the actual settin...

I am trying to what seemes to be an simple issue, but !!!group lock works with attribute 25, but if a user is sent for example to the default group on the ACS or any group where option 25 is not configured ( or configured to some value not avalable o...

I get an error when I want to authenticate a user which is using smart card to log into a win 2003 VPN server which uses Cisco Secure ACS 4.0 as AAA Server.When I use password the is no problem but when using smart card I see this error! In the CSAut...

Hi,I am using Cisco ACS 4.0 as a radius server that authenticate users for Internet access.Microsoft ISA 2004 is used as Radius client.When users tries to connect to Internet, the ISA Server forwards requests to Radius server (Cisco ACS) for authenti...

I configured my ASA to authenticate vpn client connections via an RSA server. The user is prompted for a username and passcode (pin plus number generated on fob). This works. I have been asked to have the user prompted for username, password and ...

Hi Friends,I have a ACS appliance 1113 with ACS 4.1 software loaded in my network. Issue what iam facing is i can see the failed, passed authentication and accounting logs but tacacs administration logs file is blank... below is my aaa client configu...

Dear Netpros,I have a problem where I cannot do database replication between 2 ACS Servers, I am using ver 3.0 (quite old). The errors which I am getting are : 1)Inbound database replication from ACS 'Main' denied 2)INFO Outbound replication cycle ...

Hi all, I recently implemented Downloadable Access Lists for VPN users in our Cisco PIX & IAS (Internet Authentication Service). We have an AD domain, VPN users are authenticating against AD Integrated IAS and according to windows group membership, ...

Hi,Can any one help me to configure the EAP in Cisco ACS 4.1 ,In fact I am using the Cisco ACS for wireless clients through WLC4402,in which I have enabled the 802.1X,ACS also configure for the basic authentication.I want to use the EAP authenticati...