08-24-2020 10:52 PM
I am deploying VPN with posture using ISE 2.6 and ASA.
3 VPN tunnel is configured on ASA so client wants detail of VPN tunnel on which user is connected in ISE reports.
I have generated Authentication report but there is not column for VPN tunnel detail.
so is there any way we can generate authentication report in ISE where VPN tunnel detail will include??
Solved! Go to Solution.
08-24-2020 11:40 PM
Hi,
No VPN Tunnel column that I am aware of.
As you are using ASA with multiple tunnels, you define multiple AuthC/AuthZ rules and use Cisco-VPN3000:CVPN3000/ASA/PIX7x-Tunnel-Group-Name EQUALS <Tunnel Name> (for each tunnel) as a condition in the rules. You would then know in your reports which users authenticated against which tunnel.
HTH
08-24-2020 11:40 PM
Hi,
No VPN Tunnel column that I am aware of.
As you are using ASA with multiple tunnels, you define multiple AuthC/AuthZ rules and use Cisco-VPN3000:CVPN3000/ASA/PIX7x-Tunnel-Group-Name EQUALS <Tunnel Name> (for each tunnel) as a condition in the rules. You would then know in your reports which users authenticated against which tunnel.
HTH
08-24-2020 11:51 PM
Hello rob,
Thank your for information.
we are not using Any tunnel group condition in policy set. that's why i guess VPN tunnel details not showing in ISE authentication report.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide