11-24-2010 04:37 AM - edited 03-10-2019 05:36 PM
Hi,
I have not found any documentation explaining how to create a VSA into the ACS 5.2 Appliance for RADIUS Authentication. I was able to do it on ACS 4.0 Serverfor Netscreen Firewalls. We are migrating to the ACS 5.2 Appliance and before we do I want to know how to complete the task in case the migration has a problem importing the VSA from ACS 4.
Thanks
Edgardo
Well now it gets more interesting. Our configuration on ACS Version 3.3 is authenticating its local users via RADIUS but the caveat is that Netscreen published that the port to be used is 1645. Such was added manually in the ACS 3.3 but such task either is hidden on the ACS 5.2 or it is not supported. I resourced to use RADIUS native port 1812 which on the ACS reports as having authenticated the user but the Netscreen does not authenticate. Has anyone deal with this matter? Your guidance will be appreciated.
Solved! Go to Solution.
11-24-2010 04:52 AM
Can be done from the GUI
1) Create the vendor information at following link:System Administration > ... > Configuration > Dictionaries > Protocols > RADIUS > RADIUS VSA
2) Once created select "Show Vendor Attributes" option on this page for the vendor and can then define the attributes
11-24-2010 04:52 AM
Can be done from the GUI
1) Create the vendor information at following link:System Administration > ... > Configuration > Dictionaries > Protocols > RADIUS > RADIUS VSA
2) Once created select "Show Vendor Attributes" option on this page for the vendor and can then define the attributes
11-30-2010 05:07 AM
Hi,
Thanks for you help.
Well now it gets more interesting. Our configuration on ACS Version 3.3 is authenticating its local users via RADIUS but the caveat is that Netscreen published that the port to be used is 1645. Such was added manually in the ACS 3.3 but such task either is hidden on the ACS 5.2 or it is not supported. I resourced to use RADIUS native port 1812 which on the ACS reports as having authenticated the user but the Netscreen does not authenticate. Has anyone deal with this matter? Your guidance will be appreciated.
02-20-2011 08:20 PM
ACS 5.2 supports both 1812 & 1645 for RADIUS by default
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide