07-03-2012 04:24 AM - edited 03-10-2019 07:15 PM
Hi
Is there a way to assign a voice vlan dynamically in an interface via a radius server?
best regards
Sergio
Solved! Go to Solution.
07-03-2012 10:20 PM
Sorry. I corrected the link above.
Here is another doc that I hope you'll find useful:
07-03-2012 09:44 AM
Yes. But it depends also on your IOS version.
Check this for more details:
https://supportforums.cisco.com/docs/DOC-22478
Regards,
Amjad
Sent from Cisco Technical Support iPad App
07-03-2012 02:59 PM
Could you please repost the link?
thanks
07-03-2012 10:20 PM
Sorry. I corrected the link above.
Here is another doc that I hope you'll find useful:
07-03-2012 11:01 PM
Sergio,
In addition to what Amjad posted here is a snip from the 3750 configuration guide for 802.1x authentication for the 3750s.
I would start off by trying to send the device-traffic-class=voice along with the vlan attributes.
thanks
Tarik Admani
07-04-2012 05:54 AM
there was point that i was missing
In the current release of code, a static voice VLAN must be configured on the port (via the switchport access voice vlan ) command before a new VLAN can be assigned via RADIUS.
it solved my problem thanks.
for future reference my working configuration ...
interface GigabitEthernet0/1
switchport mode access
switchport voice vlan 2
authentication host-mode multi-domain
authentication port-control auto
mab
dot1x pae authenticator
spanning-tree portfast
end
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide