cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
726
Views
0
Helpful
3
Replies

wasMachinAuthenticated

jiyoung Kim
Level 1
Level 1

                   Hi all, I have adivsed to use was MachinAuthenticated, but I can't get same results everytime I test it.

can anybody tell me how it works in detail ?

when I test it, sometimes the AD-joined PC gets wasmachinAuthenticated equals true, sometimes not.

I'm using ISE 1.2 with patch 1

1 Accepted Solution

Accepted Solutions

Venkatesh Attuluri
Cisco Employee
Cisco Employee

check this Doc" Tips to make Machine Authentication Work"

https://supportforums.cisco.com/docs/DOC-21825

View solution in original post

3 Replies 3

Venkatesh Attuluri
Cisco Employee
Cisco Employee

check this Doc" Tips to make Machine Authentication Work"

https://supportforums.cisco.com/docs/DOC-21825

Jatin Katyal
Cisco Employee
Cisco Employee

Further to what Venkatesh suggested, please verify the authorization rule you've created. If you only need Machine and user suthenticaton then look at the second rule in the screen shot.

~BR
Jatin Katyal

**Do rate helpful posts**

~Jatin

aqjaved
Level 3
Level 3

Please check the below link which can helpful for you in understanding and configuration of machine authentication:

http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_troubleshooting.pdf