Hello,
i'm deploying an Ise environment and i'm guessing what Ise Radius template to configure on the switch.
I saw a lot of different configuration commands but can't understand where to retrieve them and what's the differences.
Is the following port configuration enough to work or need to add further commands?
description NAC Enabled
switchport access vlan 100
switchport mode access
switchport voice vlan 196
authentication control-direction in
authentication event fail action next-method
authentication event server dead action authorize vlan 100
authentication event server dead action authorize voice
authentication event server alive action reinitialize
authentication host-mode multi-domain
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication timer inactivity server dynamic
mab
dot1x pae authenticator
dot1x timeout quiet-period 300
dot1x timeout tx-period 10
spanning-tree portfast edge
spanning-tree bpduguard enable
Thank you
