11-03-2016 09:32 AM - edited 03-11-2019 12:12 AM
We have several windows 10 computer presenting the computers mac address as the user name for 802.1x authentication. The user is logging into the domain with the user id. Has anybody seen this and know how to fix it? We use the Nac Agent 4.9.5.3.
11-04-2016 06:05 PM
I have only seen this before when the native supplicant in Windows was not configured and was using default settings. If the supplicant is not configured for 802.1x then it will try to do MAB instead and as a result, you will see the MAC address being used for username/password.
Are you able to confirm that the supplicant is configured properly? If yes, can you provide:
1. Supplicant settings
2. Switchport configuration
Thank you for rating helpful posts!
12-13-2016 11:00 AM
We have checked the windows supplicant setting and they appear to have the correct information. This seems to affect only newly re-imaged windows 10 machines. To make it more interesting machines side by side imaged at the same time one works correctly and the other does not.
12-13-2016 11:43 AM
Hmm, in the past I ran into this with Windows 7 machines that were missing 802.1x specific patches. Since the machines that are affected are the ones that were recently re-imaged I would start with generic windows updates.
So the next question that I have is: Have you tried to run Windows update and then try authentication again and see if that fixes the issue?
Thank you for rating helpful posts!
12-13-2016 11:59 AM
We have tried a couple new images, performed updates. What does seem to in most cases is leaving the domain and then rejoining. Weather this is a GPO issue or something else. As always we have to prove this isn't a network issue. We did a reboot of the ISE servers 2 weeks ago, new certificates and double checking the machines with issues, they seemed to have resolved. Not sure is this was due to the ISE reboot or possible a windows update.
12-16-2016 06:09 PM
What version and patch level of ISE are you running in your environment?
Thank you for rating helpful posts!
12-20-2016 12:32 PM
we are running ISE 1.4 patch 10
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: