Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
1576
Views
0
Helpful
1
Replies

Windows IIS Radius server config (NT, not 2k)

0rsnaric
Level 1
Level 1

‎02-04-2004 10:27 AM - edited ‎03-10-2019 07:39 AM

I'm trying to configure a pix 515 running 6.2.1 to allow vpn client authentication through a windows NT 4 server running IIS with radius server.

Currently I have it configured to allow pptp client connections and it works fine. Now I'm trying to configure Cisco VPN client 3.x connections using radius . Everything works fine until the user authentication, then it times out. I'm assuming the default profile on the Raduis server is not adequate, but the only sample configs I find here are for Win2k with IAS.

Can anybody help out? Do I need to create a new profile on the radius server? Or just add settings to the default (which works fine for pptp).

Thanks,

Rick

Labels:
0 Helpful
1 Reply 1

Not applicable

‎02-10-2004 01:50 PM

Try enabling RSVP. If RSVP is not enabled, a 10 sec post-dial delay occurs before the gateway forwards the call.

0 Helpful
Customers Also Viewed These Support Documents