About 0rsnaric

0rsnaric · 09-30-2021

We currently use ISE for 802.1x supplicant authentication and MAB authentication. We are looking at adding Active Directory Machine Authentication. Under Administration > External Identity Sources > Active Directory > Advanced Settings there is a che...

0rsnaric · 08-20-2021

We are having problems with Yealink phones and PoE. Our environment has some 60 C3650 switch stacks in place. Until recently, the only PoE we have drawn from them has been to Cisco APs, miscellaneous cameras, and door locks. No problems. Now we are ...

0rsnaric · 11-18-2020

Does anybody have a configuration example for setting up EIGRP on the Sourcefire 2130? Preferably via FDM, and not FMC.All of the Cisco docs I have found just go over generic flexconfig setups. Nothing specific to EIGRP. Thanks!

0rsnaric · 11-10-2020

Can anybody confirm what ipv6/MLD settings need to be added to the Nexus configurations to get VxRail loudmouth service to work correctly?I have read that multicast traffic is flooded out the vlan it was received on by default. But Dell is telling us...

0rsnaric · 05-18-2018

We currently have a single ASR1001-X at our edge, peering with 3 different ISPs to share our public IP space. The ISP connections terminate in to a switch, each on their own VLAN. The ASR has a 10G interface, with sub-interfaces also in each VLAN. ...

0rsnaric · 08-20-2021

The phones are Yealink Sip-T53s. Once up and running they are drawing 7 Watts per port and show as a class 2 device. Our switches have more than enough available power, here is from a switch that just had a failure: Module Available Used Remaining(Wa...

0rsnaric · 11-20-2020

Thank you.This ended up being nothing more than a typical eigrp setup reduced to variables and templates.No idea why they are pushing template based networking to smaller shops. I have no need to deploy this config to multiple devices...just one.

0rsnaric · 11-18-2020

This ended up being a nothing burger. Dell techs that didn't know what they were doing had misconfigured the devices. Once we got competent support they factory reset the devices and things worked as advertised.So, in summary:1. No need to do any MLD...

0rsnaric · 05-17-2018

Did you ever get this configured? I'd like to do an HA pair as well.

0rsnaric · 01-03-2018

Awesome, thank you so much for the input. Very helpful!

Member Since	‎01-27-2003 11:33 AM
Date Last Visited	‎10-07-2021 10:35 AM
Posts	144
Total Helpful Votes Received	17

User Statistics

User Activity

ISE 2.4.0.357 Patch 13 Machine Authentication

C3650 PoE issues with Yealink phones

Flexconfig EIGRP setup on Sourcefire 2130

Nexus 9k and VxRail

ASR1001 Redundancy for multi-homed BGP setup

Re: C3650 PoE issues with Yealink phones

Re: Flexconfig EIGRP setup on Sourcefire 2130

Re: Nexus 9k and VxRail

Re: The ASR 1001-X, ASR 1001-HX,

Re: ASR1001-X recommendation for redundancy method