cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1434
Views
0
Helpful
2
Replies
CB90021204
Beginner

Wired 802.1x certificate authentication with URL redirect to ISE portal

Hello,

Wondering if anyone has tried to authenticate users with certificates & then also send back a URL redirect as part of the authorization profile?

 

My goal is to provide different levels of access to users based on the ISE policy matched. I can already authenticate the users with certificate based authentication and provide different levels of wired/wireless access.

 

What I'm not sure about is if I can also push down a URL redirect as part of the same authorization profile which directs the user to a custom ISE portal informing them which level of access they have been granted. I have done this with Guest access previously, just not certificate based auth.

 

Has anyone done this before or know if its possible?

 

Thanks,

1 ACCEPTED SOLUTION

Accepted Solutions
poongarg
Cisco Employee

Refer below Cisco Live presentation (p136), which talks about 802.1x and CWA Chaining.

https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2016/pdf/BRKSEC-3697.pdf

 

View solution in original post

2 REPLIES 2
poongarg
Cisco Employee

Refer below Cisco Live presentation (p136), which talks about 802.1x and CWA Chaining.

https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2016/pdf/BRKSEC-3697.pdf

 

View solution in original post

Thanks for the information, just watched that session. Very helpful.

 

 

Content for Community-Ad