08-13-2018 01:17 PM
i have installed sponsor guest portal and i applied it for wired user and i want to change vlan after guest registration as i added new vlan in authorization profile and new vlan applied well under interface but guest still keeping old ip address and i have to release it manually from machine and renew manually so he can get new ip address
Solved! Go to Solution.
08-13-2018 02:30 PM
08-13-2018 01:41 PM
You need to make it bounce the port, otherwise the Client will never know there has been a VLAN change so it will never know it needs to request a new DHCP lease.
Personally I prefer to keep Guest stuff as a single VLAN - VLAN changes are often problematic (ie, when a guest connects in the back of a PoE phone, do a port bounce and you kill the phone)
08-13-2018 02:30 PM
08-13-2018 03:06 PM
I have developed a solution similar to the one Jason posted in my lab and it worked perfectly with Auto SmartPorts, but did not work at the customer. My theory was that my lab switch is a single switch that processed the shut/no shut quick enough so the macro didn't remove itself. Smart Port macros trigger when a link state changes on the port.
In my customer they had 5-6 switches in a stack and my theory was there was enough of a delay between shut/no shut that Smart Ports caught the link change and removed itself.
08-13-2018 02:09 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide