Wireless Autentication + WLC + ACS + AD

[Rafael Mendes]

Hello Everyone,

I'm trying to configure autentication policy in my wireless network.

I need to autenticate users members of group "Wireless users" in active directory.

My question is: I need use ACS for this autentication in AD Group? Or only the controller is enough?

I do not like to use this digital certificate solution.

My Topology is:

USER -> AP -> Controller -> ACS -> AD

Or

USER -> AP -> Controller -> AD

Help?

Tks a lot.

[andamani]

Hi,

How do you plan your AD to talk to wireless controller.?

you will need a AAA server in between.

you can go for the ACS option.

the following link gives you details of the authentication option with the wireless controller.

http://cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807f42e9.shtml

Regards,

Anisha

P.S.: please mark this thread resolved if you feel your query is answered.

[Jatin Katyal]

Well, The kind of requirement you have does ask for digital certs because most of the EAP flavors are dependent on certs.

However, you may go for LEAP ( doesn't need certs)

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080665d18.shtml#c4

You may go for WLC and LDAP ( with certs without ACS)

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a008093f1b9.shtml

Regds,

Jatin

Do rate helpful posts-