Solved: wrong time in ISE

Vladimir Radchenko · ‎06-28-2016

Hi! Anybody knows why clock time in ISE CLI and ISE WEB is different? I set up NTP and timezone after that checked the correct time in CLI, but in WEB GUI time is added 1 hour. How to solve this problem?

Naresh Ginjupalli · ‎06-30-2016

Hi ,

For certain timezones, example Asia/Novosibirsk, ISE will show the correct time on CLI but the wrong time on GUI. GUI will be one hour behind CLI.
change it to one of the timezone with GMT value inside (show timezones), for example Etc/GMT+6change it other timezone for example: Asia/Qyzylorda

View solution in original post

Naresh Ginjupalli · ‎06-29-2016

Hi ,

May I know the timezone you are using to configure in ISE.

Vladimir Radchenko · ‎06-30-2016

I perform all steps in according with official guide: http://www.cisco.com/c/en/us/td/docs/security/ise/2-0/admin_guide/b_ise_admin_guide_20.html (through CLI)

but problem still actual

Naresh Ginjupalli · ‎06-30-2016

Hi ,

For certain timezones, example Asia/Novosibirsk, ISE will show the correct time on CLI but the wrong time on GUI. GUI will be one hour behind CLI.
change it to one of the timezone with GMT value inside (show timezones), for example Etc/GMT+6change it other timezone for example: Asia/Qyzylorda

Vladimir Radchenko · ‎06-30-2016

Thank you! problem is solved