Aniserver problem

[wwanjohi123]

I have a problem with my ciscoworks. From campus manager i can't connect to aniserver. It is really a nightmare and it keeps recurring.

Winnie.

[wwanjohi123]

Thank you all,

I re-installed ciscoworks locally and not through RDP and my servics are manual except the deamon. I will work without the MacAfee untill it works well. i'll also check out the links for more info.

Once again, Thank you all.

Best Regards

Winnie.

[wwanjohi123]

Hi,

I need to discover devices only with loopback addresses to avoid duplication of devices by virtual addresses. How do ii do this?

Winnie.

[wwanjohi123]

What is the password for cwuser account in ciscoworks

[David Stanford]

For any account configured in CiscoWorks go to Server - Security - Local User setup. This is where passwords are configured.

If you are talking about casuser then you need to use resetCasuser.exe to change the password.

[wwanjohi123]

Will it affect the running of the application in any way? Will it request me to input another password that i will know, this is because i need to configure RCP on all my Cisco devices for RME to work and i'll require to input the same cwuser password on the devices.

See below:

"username cwuser password 7 000C1C0A05

ip rcmd rcp-enable

ip rcmd remote-host cwuser 172.16.15.15 cwuser enable

ip rcmd remote-username cwuser"

[David Stanford]

Ok this is different...this is a username used to access the devices.

If you have already added the attributes to the DCR then you can determine this password by exporting a device attributes to csv file. This will show the password in clear text (if you export a device that has this configured)

Also, I suggest starting new threads on the forum for each issue that you have so that all can read and make suggestions.