11-12-2013 09:33 AM
Hello All,
I had review all the compatibility matrix of versions of Cisco Prime 1.2, 1.4 and 2.0, and just can't find the Cisco Catalyst 2960-X series as a listed device, which really surprises me.
Can you clear that out??
Thanks,
Solved! Go to Solution.
02-05-2014 02:08 PM
The 2960X (and XR) support was added with Device Pack 2 for PI 2.0. It was released on 22 January 2014 and is available here.
(PI 2.1 won't be out until later this year, release date not yet announced.)
Following are the 2960X/XR types added:
Cisco Catalyst 2960-X Series Switches | |||
Device Type | SYSOIDS | S/W Version | Software |
Cisco Catalyst 2960X-24TS-L Switch | OID:1.3.6.1.4.1.9.1.1699 | >=12.1 | IOS |
Cisco Catalyst 2960X-48FPD-L Switch | OID:1.3.6.1.4.1.9.1.1690 | >=12.1 | IOS |
Cisco Catalyst 2960X-48LPD-L Switch | OID:1.3.6.1.4.1.9.1.1691 | >=12.1 | IOS |
Cisco Catalyst 2960X-48TD-L Switch | OID:1.3.6.1.4.1.9.1.1692 | >=12.1 | IOS |
Cisco Catalyst 2960X-24PD-L Switch | OID:1.3.6.1.4.1.9.1.1693 | >=12.1 | IOS |
Cisco Catalyst 2960X-24TD-L Switch | OID:1.3.6.1.4.1.9.1.1694 | >=12.1 | IOS |
Cisco Catalyst 2960X-48FPS-L Switch | OID:1.3.6.1.4.1.9.1.1695 | >=12.1 | IOS |
Cisco Catalyst 2960X-48LPS-L Switch | OID:1.3.6.1.4.1.9.1.1696 | >=12.1 | IOS |
Cisco Catalyst 2960X-24PS-L Switch | OID:1.3.6.1.4.1.9.1.1697 | >=12.1 | IOS |
Cisco Catalyst 2960X-48TS-L Switch | OID:1.3.6.1.4.1.9.1.1698 | >=12.1 | IOS |
Cisco Catalyst 2960X-24PSK-L Switch | OID:1.3.6.1.4.1.9.1.1700 | >=12.1 | IOS |
Cisco Catalyst 2960X-48LPS-S Switch | OID:1.3.6.1.4.1.9.1.1701 | >=12.1 | IOS |
Cisco Catalyst 2960X-24PS-S Switch | OID:1.3.6.1.4.1.9.1.1702 | >=12.1 | IOS |
Cisco Catalyst 2960X-48TS-LL Switch | OID:1.3.6.1.4.1.9.1.1703 | >=12.1 | IOS |
Cisco Catalyst 2960X-24TS-LL Switch | OID:1.3.6.1.4.1.9.1.1704 | >=12.1 | IOS |
Cisco Catalyst 2960-XR Series Switches | |||
Device Type | SYSOIDS | S/W Version | Software |
Cisco Catalyst 2960XR-48FPD-I Switch | OID:1.3.6.1.4.1.9.1.1797 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48LPD-I Switch | OID:1.3.6.1.4.1.9.1.1798 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48TD-I Switch | OID:1.3.6.1.4.1.9.1.1799 | >=12.1 | IOS |
Cisco Catalyst 2960XR-24PD-I Switch | OID:1.3.6.1.4.1.9.1.1800 | >=12.1 | IOS |
Cisco Catalyst 2960XR-24TD-I Switch | OID:1.3.6.1.4.1.9.1.1801 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48FPS-I Switch | OID:1.3.6.1.4.1.9.1.1802 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48LPS-I Switch | OID:1.3.6.1.4.1.9.1.1803 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48TS-I Switch | OID:1.3.6.1.4.1.9.1.1804 | >=12.1 | IOS |
Cisco Catalyst 2960XR-24PS-I Switch | OID:1.3.6.1.4.1.9.1.1805 | >=12.1 | IOS |
Cisco Catalyst 2960XR-24TS-I Switch | OID:1.3.6.1.4.1.9.1.1806 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48FPD-L Switch | OID:1.3.6.1.4.1.9.1.1807 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48LPD-L Switch | OID:1.3.6.1.4.1.9.1.1808 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48TD-L Switch | OID:1.3.6.1.4.1.9.1.1809 | >=12.1 | IOS |
Cisco Catalyst 2960XR-24PD-L Switch | OID:1.3.6.1.4.1.9.1.1810 | >=12.1 | IOS |
Cisco Catalyst 2960XR-24TD-L Switch | OID:1.3.6.1.4.1.9.1.1811 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48FPS-L Switch | OID:1.3.6.1.4.1.9.1.1812 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48LPS-L Switch | OID:1.3.6.1.4.1.9.1.1813 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48TS-L Switch | OID:1.3.6.1.4.1.9.1.1814 | >=12.1 | IOS |
Cisco Catalyst 2960XR-24PS-L Switch | OID:1.3.6.1.4.1.9.1.1815 | >=12.1 | IOS |
Cisco Catalyst 2960XR-24TS-L Switch | OID:1.3.6.1.4.1.9.1.1816 | >=12.1 | IOS |
11-12-2013 12:58 PM
2960-X, if I remembered correctly, will be supported with PI 2.1.
02-05-2014 11:28 AM
it's posible download cisco prime infraestructure 2.1?
02-05-2014 02:08 PM
The 2960X (and XR) support was added with Device Pack 2 for PI 2.0. It was released on 22 January 2014 and is available here.
(PI 2.1 won't be out until later this year, release date not yet announced.)
Following are the 2960X/XR types added:
Cisco Catalyst 2960-X Series Switches | |||
Device Type | SYSOIDS | S/W Version | Software |
Cisco Catalyst 2960X-24TS-L Switch | OID:1.3.6.1.4.1.9.1.1699 | >=12.1 | IOS |
Cisco Catalyst 2960X-48FPD-L Switch | OID:1.3.6.1.4.1.9.1.1690 | >=12.1 | IOS |
Cisco Catalyst 2960X-48LPD-L Switch | OID:1.3.6.1.4.1.9.1.1691 | >=12.1 | IOS |
Cisco Catalyst 2960X-48TD-L Switch | OID:1.3.6.1.4.1.9.1.1692 | >=12.1 | IOS |
Cisco Catalyst 2960X-24PD-L Switch | OID:1.3.6.1.4.1.9.1.1693 | >=12.1 | IOS |
Cisco Catalyst 2960X-24TD-L Switch | OID:1.3.6.1.4.1.9.1.1694 | >=12.1 | IOS |
Cisco Catalyst 2960X-48FPS-L Switch | OID:1.3.6.1.4.1.9.1.1695 | >=12.1 | IOS |
Cisco Catalyst 2960X-48LPS-L Switch | OID:1.3.6.1.4.1.9.1.1696 | >=12.1 | IOS |
Cisco Catalyst 2960X-24PS-L Switch | OID:1.3.6.1.4.1.9.1.1697 | >=12.1 | IOS |
Cisco Catalyst 2960X-48TS-L Switch | OID:1.3.6.1.4.1.9.1.1698 | >=12.1 | IOS |
Cisco Catalyst 2960X-24PSK-L Switch | OID:1.3.6.1.4.1.9.1.1700 | >=12.1 | IOS |
Cisco Catalyst 2960X-48LPS-S Switch | OID:1.3.6.1.4.1.9.1.1701 | >=12.1 | IOS |
Cisco Catalyst 2960X-24PS-S Switch | OID:1.3.6.1.4.1.9.1.1702 | >=12.1 | IOS |
Cisco Catalyst 2960X-48TS-LL Switch | OID:1.3.6.1.4.1.9.1.1703 | >=12.1 | IOS |
Cisco Catalyst 2960X-24TS-LL Switch | OID:1.3.6.1.4.1.9.1.1704 | >=12.1 | IOS |
Cisco Catalyst 2960-XR Series Switches | |||
Device Type | SYSOIDS | S/W Version | Software |
Cisco Catalyst 2960XR-48FPD-I Switch | OID:1.3.6.1.4.1.9.1.1797 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48LPD-I Switch | OID:1.3.6.1.4.1.9.1.1798 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48TD-I Switch | OID:1.3.6.1.4.1.9.1.1799 | >=12.1 | IOS |
Cisco Catalyst 2960XR-24PD-I Switch | OID:1.3.6.1.4.1.9.1.1800 | >=12.1 | IOS |
Cisco Catalyst 2960XR-24TD-I Switch | OID:1.3.6.1.4.1.9.1.1801 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48FPS-I Switch | OID:1.3.6.1.4.1.9.1.1802 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48LPS-I Switch | OID:1.3.6.1.4.1.9.1.1803 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48TS-I Switch | OID:1.3.6.1.4.1.9.1.1804 | >=12.1 | IOS |
Cisco Catalyst 2960XR-24PS-I Switch | OID:1.3.6.1.4.1.9.1.1805 | >=12.1 | IOS |
Cisco Catalyst 2960XR-24TS-I Switch | OID:1.3.6.1.4.1.9.1.1806 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48FPD-L Switch | OID:1.3.6.1.4.1.9.1.1807 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48LPD-L Switch | OID:1.3.6.1.4.1.9.1.1808 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48TD-L Switch | OID:1.3.6.1.4.1.9.1.1809 | >=12.1 | IOS |
Cisco Catalyst 2960XR-24PD-L Switch | OID:1.3.6.1.4.1.9.1.1810 | >=12.1 | IOS |
Cisco Catalyst 2960XR-24TD-L Switch | OID:1.3.6.1.4.1.9.1.1811 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48FPS-L Switch | OID:1.3.6.1.4.1.9.1.1812 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48LPS-L Switch | OID:1.3.6.1.4.1.9.1.1813 | >=12.1 | IOS |
Cisco Catalyst 2960XR-48TS-L Switch | OID:1.3.6.1.4.1.9.1.1814 | >=12.1 | IOS |
Cisco Catalyst 2960XR-24PS-L Switch | OID:1.3.6.1.4.1.9.1.1815 | >=12.1 | IOS |
Cisco Catalyst 2960XR-24TS-L Switch | OID:1.3.6.1.4.1.9.1.1816 | >=12.1 | IOS |
02-05-2014 04:30 PM
Thanks!
06-19-2015 08:21 AM
I had this problem too but it is not fully resolved:
https://supportforums.cisco.com/discussion/12501436/prime-22-device-pack-3-wrong-2960x-device-type
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide