12-15-2014 07:22 AM
Hello,
I have a client that is a full Cisco shop and needs pretty much a network assessment done at their location.
I need a tool something like NMAP/SpiceWorks that gathers Cisco model, OS version, IP, etc; something that could possibly work off SNMP. Basically a tool that scans there whole network of known and possibly unknown devices.
I heard Cisco has their own tools that help do this quickly in the case customers need to do product/license renewals or list EoL devices.
Can anyone advise a good tool for this?
Thanks in advance!
Charles
Solved! Go to Solution.
12-15-2014 07:44 AM
You're welcome.
That is the name of the program. If you are a Cisco partner (and your cco userid has partner level access), you can find program details at the following link:
https://communities.cisco.com/docs/DOC-54790
Please take a moment to rate helpful replies and mark your quesiton as answered if it has been.
12-15-2014 07:29 AM
Partners can register and do this via the Cisco Funded Network Assessment program.
The most commonly used tool is Netformx. You can also use Cisco Prime LMS among others.
12-15-2014 07:41 AM
Marvin,
Thanks for your quick reply. Can you guide me to the Cisco Funded Network Assessment program? What is the specific name for this or where do I go to attain this?
I will look into Netfomx as well.
Best regards,
Charles
12-15-2014 07:44 AM
You're welcome.
That is the name of the program. If you are a Cisco partner (and your cco userid has partner level access), you can find program details at the following link:
https://communities.cisco.com/docs/DOC-54790
Please take a moment to rate helpful replies and mark your quesiton as answered if it has been.
06-15-2017 08:47 AM
Hi,
May be you can use
and you can find it here:
http://www.cisco.com/c/en/us/products/cloud-systems-management/active-advisor/index.html?keycode=000418636
01-18-2015 04:59 AM
Hello,
You may find useful Pretty Good Terminal http://www.prettygoodterminal.com which has recently been published. This software is more about device management (via ssh/telnet) in large scales and through several jump server hops, than a terminal application. It was developed by me when I was given a task to configure more than 50000 CPE routers.So this software is a response to a real challenge and it is a good fit to collect device information.
Regards,
Laszlo
06-27-2017 01:26 AM
Have a look here:
10-03-2017 06:31 PM
Check Nectus at http://www.nectus5.com for Network Discovery
You can use it for 60 days, should be enough time to finish any discovery project
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide