cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
727
Views
0
Helpful
3
Replies

CM Network topology map

baotran09
Level 1
Level 1

Is it possible to create an ACS account to permit end users to view only Campus Manager network topology map?

Thanks

3 Replies 3

Joe Clarke
Cisco Employee
Cisco Employee

Yes, but only in LMS 3.2.  You must first set the following property to true in NMSROOT/campus/etc/cwsi/ANIServer.properties:

Topo.ACSAuthorizedView=true

Thanks Joe.

Are there any doco on how to create an end user account on ACS which will allow the user to access ciscoworks to view only the topology map?

Besides the LMS user guide, this white paper talks about how to enable ACS integration:

http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_white_paper0900aecd80613f62.html

It's a bit old, but the ACS configuration steps are still the same.

Review Cisco Networking for a $25 gift card