06-13-2012 07:49 AM
Hi there,
I need help to create a scheduled task in LMS. In this task I would like to regularly check time on all network devices in LMS and generate a rapport about this that would be sent to e-mail. All network devices have the same NTP server. How can I create this task? LMS version is 3.2 SP1.
Thanks in advanced.
06-13-2012 12:40 PM
Hi,
For such type of request you may like to use the HUM module in LMS compiling the respective NTP MIB in the LMS and getting the report generated using "customize reports" feature but i doubt if you would be able to send that to your email but it would be populated on the server itself which you would be able to check when needed.
Regards
K. Lakshmi Ganesh
06-14-2012 12:41 AM
Thanks for a quick reply and the advice. Will try with cntpSysClock MIB.
06-27-2012 06:12 AM
Hi,
I have downloaded CISCO-NTP-MIB from Cisco site> http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&mibName=CISCO-NTP-MIB
MIB Name | Version 2 | |||||
1. SNMPv2-SMI | | | Download | ||||
2. SNMPv2-TC | | | Download | | | |||
3. CISCO-SMI | | | Download | | | |||
4. INET-ADDRESS-MIB | | | Download | | | |||
5. RFC1155-SMI | | | Non-Cisco MIB | | | |||
6. RFC-1212 | | | Non-Cisco MIB | | | |||
7. RFC-1215 | | | Non-Cisco MIB | | | |||
8. SNMPv2-TC-v1 | | | Non-Cisco MIB | | | |||
9. CISCO-NTP-MIB | | | Download | | |
After importing all MIB's from the list I don't have cntpSysClock option to select. Instead of 11 MIB valuse which are included in this CISCO-NTP-MIB
cntpSysLeap | 1.3.6.1.4.1.9.9.168.1.1.1 |
cntpSysClock | 1.3.6.1.4.1.9.9.168.1.1.10 |
cntpSysSrvStatus | 1.3.6.1.4.1.9.9.168.1.1.11 |
cntpSysStratum | 1.3.6.1.4.1.9.9.168.1.1.2 |
cntpSysPrecision | 1.3.6.1.4.1.9.9.168.1.1.3 |
cntpSysRootDelay | 1.3.6.1.4.1.9.9.168.1.1.4 |
cntpSysRootDispersion | 1.3.6.1.4.1.9.9.168.1.1.5 |
cntpSysRefId | 1.3.6.1.4.1.9.9.168.1.1.6 |
cntpSysRefTime | 1.3.6.1.4.1.9.9.168.1.1.7 |
cntpSysPoll | 1.3.6.1.4.1.9.9.168.1.1.8 |
cntpSysPeer | 1.3.6.1.4.1.9.9.168.1.1.9 |
I only have 6 options in cntpSystem. Here is print-screen>
What seems to be the problem here and how can I import this MIB that i need?
cntpSysClock | 1.3.6.1.4.1.9.9.168.1.1.10 |
Thanks.
07-02-2012 07:27 AM
Can anyone help me with this problem?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide