09-23-2008 12:10 AM
Hi all
after upgrading to 2.0.3 (via 2.0.2) from 2.0 (and rediscovered all devices) all callmanagers are partly monitored due to WMI auth error (Success:Incorrect WMI Credential or Insufficient Priviledges).
I have tested WMI from cuom server to callmanagers as suggested in some troubleshooting docs, all seems fine with those tests.
I tested from a clean 2.0.3 testserver and that seems ok to.
Also after the automatic weekly discovery I get SOAPnotreachable from one ccm. and service down alert from all ccm's
ccm's are on windows version 4.1(3.20735).
anyone got any ideas, before reinstalling the server ?
rgds
Mats
09-29-2008 10:04 AM
Device experienced Simple Object Access Protocol (SOAP) connectivity failure while polling. SOAP attributes will not be polled
Cisco Unified Communications Manager device experienced SOAP communication failure with the management application. CallManager may be overloaded or the web service may be down. Rediscover the device in Cisco Unified Operations Manager.
09-30-2008 04:47 AM
Hi
I also read that explanation, but rediscover wont help, now i reinstalled the server and I have no SOAP errors at least "only" WMI error. I tested WMI with wbemtest from cuom server, all ccms OK. suggested in table 18 in http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6491/ps6705/ps6535/ps7121/prod_white_paper0900aecd8067e2e6.pdf
rgds
Mats
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide