cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
558
Views
0
Helpful
1
Replies

Deploying a saved configuration to a different switch

brivington
Level 1
Level 1

Hello, I am using CiscoWorks LMS 3.2 and I am trying to deploy a configuration from one switch, to a different (but same model) switch. Any assistance would be appreciated.

Thanks.

1 Accepted Solution

Accepted Solutions

Joel Monge
Cisco Employee
Cisco Employee

You can do this under RME > Config Mgmt > Config Editor > Config Files.  Choose the option that says "External Location", choose the device you wish to deploy the configuration to and then select the configuration you wish to deploy from the shadow directory located under CSCOpx/files/rme/dcma.  You need to actually select the configuration file as "Location" under "External Configuration File" ie. C:/Program Files/CSCOpx/files/rme/dcma/shadow/Switches_and_Hubs/PRIMARY/cr-nms-6506e.cfg.  Then click on Edit and hit Deploy.

View solution in original post

1 Reply 1

Joel Monge
Cisco Employee
Cisco Employee

You can do this under RME > Config Mgmt > Config Editor > Config Files.  Choose the option that says "External Location", choose the device you wish to deploy the configuration to and then select the configuration you wish to deploy from the shadow directory located under CSCOpx/files/rme/dcma.  You need to actually select the configuration file as "Location" under "External Configuration File" ie. C:/Program Files/CSCOpx/files/rme/dcma/shadow/Switches_and_Hubs/PRIMARY/cr-nms-6506e.cfg.  Then click on Edit and hit Deploy.