06-05-2015 02:57 AM
Hello Experts,
In Cisco IOS, I could get that below IP SLAs operations are supported for IPv6.
ICMP Echo, UDP Echo, UDP Jitter and TCP Connect.
I wanted to know if HTTP operation also supports IPv6 (URLs) in any of the latest Cisco IOS software?
Thank you,
Arun
Solved! Go to Solution.
06-07-2015 08:10 PM
Hi Arun,
I found this
IPSLA 4.0 - IP v6 phase2 | 15.2(3)T Cisco IOS XE Release 3.7S 15.1(2)SG Cisco IOS XE Release 3.4SG | Support was added for operability in IPv6 networks. The following commands are introduced or modified: http (IP SLA), show ip sla configuration, show ip sla summary.
|
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipsla/configuration/15-mt/sla-15-mt-book/sla_http.html#GUID-3733D00E-82CD-4B46-AE6E-860B6803B13D
Hope it will help
Thanks-
Afroz
****Ratings Encourages Contributors ***
06-07-2015 08:10 PM
Hi Arun,
I found this
IPSLA 4.0 - IP v6 phase2 | 15.2(3)T Cisco IOS XE Release 3.7S 15.1(2)SG Cisco IOS XE Release 3.4SG | Support was added for operability in IPv6 networks. The following commands are introduced or modified: http (IP SLA), show ip sla configuration, show ip sla summary.
|
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipsla/configuration/15-mt/sla-15-mt-book/sla_http.html#GUID-3733D00E-82CD-4B46-AE6E-860B6803B13D
Hope it will help
Thanks-
Afroz
****Ratings Encourages Contributors ***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide