cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
205
Views
1
Helpful
2
Replies

Enable snmp v3 command

annaschmidt
Level 1
Level 1

 I want to enable SNMPv3 on a Cisco router, v1/v2 is fine but v3 refuses to work. Can you help?

1 Accepted Solution

Accepted Solutions

Ruben Cocheno
Spotlight
Spotlight

@annaschmidt 

Check if you have the username/password correct and verify the logs

Tag me to follow up.
Please mark it as Helpful and/or Solution Accepted if that is the case. Thanks for making Engineering easy again.
Connect with me for more on Linkedin https://www.linkedin.com/in/rubencocheno/

View solution in original post

2 Replies 2

Ruben Cocheno
Spotlight
Spotlight

@annaschmidt 

Check if you have the username/password correct and verify the logs

Tag me to follow up.
Please mark it as Helpful and/or Solution Accepted if that is the case. Thanks for making Engineering easy again.
Connect with me for more on Linkedin https://www.linkedin.com/in/rubencocheno/

Hello,

'refuses to work' means what exactly ? Can you post your configuration ?