07-18-2012 08:13 AM
Hi,
I have tried enabling NetFlow on my cisco router, As soon as I enabled NetFlow on the device. The HTTP traffic thorugh this router is getting dropped or blocked. When I disable NetFlow everything works normal. I have attached the Cisco router configuration with this thread.
Note :-
Right now NetFlow comfiguration is removed, I tried enabling NetFlow V5. I have tried only ingress, egress and route-cache flow. Result is same.
Solved! Go to Solution.
07-22-2012 06:56 PM
I have looked at the config that you posted. But since the NetFlow has been removed there is no indication of what the problem is. If you want us to help identify the problem then you need to give us the configuration in which the problem exists.
HTH
Rick
07-22-2012 06:56 PM
I have looked at the config that you posted. But since the NetFlow has been removed there is no indication of what the problem is. If you want us to help identify the problem then you need to give us the configuration in which the problem exists.
HTH
Rick
07-27-2012 08:48 AM
Hi Rick,
The NetFlow configuration is same as regular NetFlow. "ip flow ingress" on all the interfaces and I do see NetFlow packets exorted to my server and I am able to see the device in software. But the problem, as soon as I enable NetFlow on the router, the HTTP traffic to internet from my users are getting blocked. If I remove the NetFlow, users can connect the websites.
Strange !!!!!!!!!!
07-28-2012 12:50 PM
I agree that this is strange. I have looked again at the config and do not see what would cause this behavior. I wonder if it has something to do with the Service Policy configured. But I have looked through the logic and do not see a problem.
I do notice that the version of IOS running is quite old. I wonder if there is some bug in that version of code. And I wonder if you upgraded the router to more recent code whether the problem would be resolved.
HTH
Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide