HOW TO SET VPN CLIENT ON MERAKI MX95

[Sencyty]

Hello everyone, I need to replicate the functionality of client VPN (AnyConnect) set up in ASA on MX95.

my 1st question is how to view the configuration on ASA and also the set up procedure on MX95. I just need more clarity to be sure I really get it right.

Thank you.

[Georg Pauwen]

Hello,

not really sure what you are after, but check the links below, the first one shows the ASA Anyconnect settings, the second one the Meraki settings:

Cisco ASA AnyConnect VPN ‘Using CLI’

https://www.petenetlive.com/KB/Article/0000943

AnyConnect on the MX Appliance

https://documentation.meraki.com/MX/AnyConnect_on_the_MX_Appliance

[Jitendra Kumar]

The below URL will help you to understand the step-by-step VPN configuration on the Meraki MX.

https://youtu.be/tGP_OLRgOck

further if you want to check VPN config on the ASA CLI--

sh run tunnel-group anyconnect

show run --for full config veiw.

Thanks,

Jitendra

[Sencyty]

Thank you Jitendra,

I actually do the set up but getting this error message.

"The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiation with the remote computer."  what could be the problem?